Water Damage Restoration – What Exactly Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. The two main large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage and mold restoration. The S500 damage because of water guide is the benchmark tool which is used by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most crucial step in water damage restoration. The assessment must be correct in order that the right response can be utilized. In restorating the injury brought on by water, technicians and the insurance firms must work together and understand what is damaged and how to make restoring the injury. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a proper water damage and mold restoration. Categorization is situated on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This can be water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water which includes some contaminants like water from the dishwasher, washing machine or toilet with urine.
Category 3 – This really is water that is highly unsanitary and can do causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a few examples.
Decontamination and Drying – Right after the evaluation is complete, the entire process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and much less water has been absorbed by materials. This leads to slow evaporation rate. Class 2 Damage – Once the damage is to the whole room and carpet area. Class 3 Damage – When the entire area is saturated with water and sophistication 4 Damage – when there are many deep saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination has to be done if contamination has become detected in the community. Decontamination may be completed for the complete area or perhaps in specific pockets where contamination continues to be detected.
Monitoring and Completion – Monitoring the restoration process of damage caused as a result of damage is essential to obtain the desired results. One has to be proactive throughout the monitoring process. Checking in the event the drying tools are setup properly, assessing in the event the personnel involved are qualified for the task and checking when the equipments are in working order inwtsy all part of the monitoring process. Necessary steps should be taken if something wrong is spotted through the monitoring process. The complete procedure for water damage and mold restoration will be classified as complete only once humidity, temperature as well as the moisture content is really as per industry standards. Upon completing water damage restoration process, the drying equipment can be removed.